HiVi Custom Install Line - VX Series

In-Ceiling Speakers (Click for specs and images)

In-Wall Speakers (Click for specs and images)

Features and Benefits

Directional Silk Dome Tweeters - The silk dome tweeters allow for a 30-degree tilt with full rotation swivel. This provides the installer or listener with the ability to tailor and optimize performance to focus on the intended listening area.

Skillfully Engineered Crossovers Each speaker features crossovers that blend the sound spectrum seamlessly with skillfully engineered 6, 12, 18db networks. The tweeters midranges also feature Polymide auto reset switch technology for high power protection. This will insure that that the tweeters and are never damaged in case of overpower.

Durable Construction All speakers are designed for excellent performance in a full range of indoor listening environments with PP Plastics, large wire gauges for better transfer of signal, stainless steel hardware and rust-roof aluminum grilles. This will ensure many years of listening enjoyment.

VX Series In-Ceiling



VX5-C

5.25”2-way In-Ceiling Speaker
Woofer: 5.25” PP cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 19mm Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 55Hz- 22KHz
Sensitivity: 87dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 6.95"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX6-C

6.5” 2-way In-Ceiling Speaker
Woofer: 6.5” PP cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-60 watts
Impedance: 8 ohm
Cut Out size: 205mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX6-SC

6.5” 2-way Stereo In-Ceiling Speaker
Woofer: 6.5” PP cone, rubber surround, 18.5oz magnet, 1" voice coil, bumped back plate, vented pole piece Tweeters: Dual 19mm Silk domes, Ferro-fluid cooled, Neodymium magnet, wide dispersion. Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeters
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-80 watts per channel
Impedance: 8 ohm
Cut Out Size: 8.07"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX8-C

8” 2-way In-Ceiling Speaker
Woofer: 8” PP cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-125 watts
Impedance: 8 ohm
Cut Out size: 250mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX8-SC

8” 2-way Stereo In-Ceiling Speaker
Woofer: 8 ”
PP cone, rubber surround, 21.8oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Dual 19mm Silk domes, Ferro-fluid cooled, Neodymium magnets, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts per channel
Impedance: 8 ohm
Cut Out Size: 9.724"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX10-SW

10” In-Ceiling SubWoofer
Woofer:
10” PP cone, rubber surround, 33oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Frequency Response: 23Hz- 500Hz
Sensitivity: 84dB
Recommended amplifier power: 10-200 watts
Impedance: 8 ohm
Cut Out size: 311mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK

VX Series In-Wall




VX5-W

5.25” 2-way In-Wall Speaker
Woofer: 5.25” PP cone, rubber surround, 12.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 0.8" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm jumper
Cut Out Size: 10.473"X7.126"
Weight (pair pack):
Dimensions (pair pack):
SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX6-W

6.5” 2-way In-Wall Speaker
Woofer: 6.5” PP cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 6dB woofer section, 6dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 88dB
Recommended amplifier power: 10-100 watts
Impedance: 8 ohm
Cut Out size: 10.866X7.441"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VX8-W

8” 2-way In-Wall Speaker
Woofer: 8” PP cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 39Hz- 22KHz
Sensitivity: 88dB
Recommended amplifier power:
10-125 watts
Impedance: 8 ohm
Cut Out size: 12.815"X8.780"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK




VX5-LCR

5.25” In-Wall Video Shielded
Left, Center or Right Channel Speaker
Woofer: 5.25” PP cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees,19mm silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, polymide auto protective reset switch for tweeter
Frequency Response: 55Hz- 22KHz
Sensitivity: 87dB
Recommended amplifier power: 10-125 watts
Impedance: 8 ohm
Cut Out Size: 16.299"X7.411"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK


cheap fifa 14 coins fifa 14 coins cheap fut 14 coins FIFA 14 Ultimate Team Coins FIFA 14 Coins Buy Cheap FIFA 14 Coins cheap FIFA 14 Coins fifa 14 coins Cheap FIFA 14 Coins cheap fifa 14 coins



©2006 HiVi Inc.(USA) All rights reserved.