HiVi Custom Install - VR Series

In-Ceiling Speakers (Click for images and specs)

In-Wall Speakers (Click for images and specs)

Features and Benefits

Attenuation Switches The VR Line features 3dB attenuation for woofers and tweeters. Switches are located on the front baffle of all speakers, and allow the installer or end-user to fine tune speaker output levels to match room designs, specific applications or individual listening preferences.

Nomex “Stratum” Cones The VR Series uses a layered Nomex “Stratum” cones for smooth and responsive lower end frequencies. The “Stratum” cone is layered with honeycomb shaped Nomex fibers between tightly woven fiberglass. This structure provides stiffness, strength and durability. This composite cone lets the woofer section play more defined bass, and produces a refined midrange to bring a cleaner, clearer warmer listening experience.

Infused Silk Tweeters - The silk tweeters are infused with bonding resins which add strength and moisture resistance while allowing for smoother frequency response output for the tweeter. The VR Series tweeters are able to handle more power and image more consistently than most soft dome tweeters. Tweeters allow for a 30-degree tilt with full rotation swivel, allowing tailored and optimized performance to match any room design.

Skillfully Engineered Crossovers Each speaker features crossovers that blend the sound spectrum seamlessly with skillfully engineered 6, 12, 18 and 24db networks. The tweeters midranges also feature Polymide auto reset switch technology for high power protection. This will insure that that the tweeters and are never damaged in case of overpower.

Durable Construction All speakers are designed for excellent performance in a full range of indoor listening environments with PP Plastics, large wire gauges for better transfer of signal, stainless steel hardware and rust-roof aluminum grilles. This will ensure many years of listening enjoyment.

VR In-Ceiling Speakers





VR5-C

5.25”2-way In-Ceiling Speaker
Woofer: 5.25” Nomex “Stratum” cone, rubber surround, 12oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 185mm
Weight (pair pack):
Dimensions (pair pack):

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK




VR6-C

6.5” 2-way In-Ceiling Speaker
Woofer: 6.5” Nomex “Stratum” cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts
Impedance: 8 ohm
Cut Out size: 205mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VR6-SC

6.5” 2-way Stereo In-Ceiling Speaker
Woofer: 6.5” Nomex “Stratum” cone, rubber surround, 18.5oz magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeters: Dual 0.8" Silk domes, Ferro-fluid cooled, Neodymium magnet, wide dispersion.
Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeters
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-60 watts per channel
Impedance: 8 ohm
Cut Out Size: 8.07"

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VR8-C

8” 2-way In-Ceiling Speaker
Woofer: 8” Nomex “Stratum” cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-120 watts
Impedance: 8 ohm
Cut Out size: 250mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK




VR8-SC

8” 2-way Stereo In-Ceiling Speaker
Woofer: 8” Nomex “Stratum” cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk domes, Ferro-fluid cooled, Neodymium magnets, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-120 watts per channel
Impedance: 8 ohm
Cut Out Size: 250mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK

VR In-Wall Speakers



VR5-W

5.25” 2-way In-Wall Speaker
Woofer: 5.25” Nomex “Stratum” cone, rubber surround, 12oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 0.8" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 30KHz
Sensitivity: 85dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 267mm X 182mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VR6-W

6.5” 2-way In-Wall Speaker
Woofer: 6.5” Nomex “Stratum” cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts
Impedance: 8ohm
Cut Out size: 276mm X 189mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK



VR8-W

8” 2-way In-Wall Speaker
Woofer: 8” Nomex “Stratum” cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-120 watts
Impedance: 8 ohm
Cut Out size: 326mm X 223mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK

 





VR5-LCR

5.25” In-Wall Video Shielded
Left, Center or Right Channel Speaker
Woofer: 5.25” Nomex “Stratum” cone, rubber surround, 12.3oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees,1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 416mm X 188mm

SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK


cheap fifa 14 coins fifa 14 coins cheap fut 14 coins FIFA 14 Ultimate Team Coins FIFA 14 Coins Buy Cheap FIFA 14 Coins cheap FIFA 14 Coins fifa 14 coins Cheap FIFA 14 Coins cheap fifa 14 coins



©2006 HiVi Inc.(USA) All rights reserved.