VA Series Indoor/Outdoor Speakers
Like all HiVi products, the VA Series of Indoor/Outdoor Speakers are designed for sound performance and reliability.
Highly durable ABS cabinets with UV solar protection prevent fading and other environmental damage. All Brackets and Grilles are rust-proof aluminum. All hardware is stainless steel.
|
VA4-OS
4” 2-way Indoor/Outdoor Speaker
Woofer: 4 ” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 65Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-60 watts
Impedance: 8 ohm
SHIPPED WITH GRILLES, FRAMES, BRACKETS AND MANUAL |
|
VA5-OS
5.25” 2-way Indoor/Outdoor Speaker
Woofer: 5.25” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 60Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
SHIPPED WITH GRILLES, FRAMES, BRACKETS AND MANUAL |
|
VA6-OS
6.5” 2-way Indoor/Outdoor Speaker
Woofer: 6.5” Aluminum cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 88dB
Recommended amplifier power: 10-125 watts
Impedance: 8 ohm
SHIPPED WITH GRILLES, FRAMES, BRACKETS AND MANUAL |
|
VA8-OS
8” 2-way Indoor/Outdoor Speaker
Woofer: 8 ” Aluminum cone, rubber surround, 21.8oz Magnet, 1.5" voice coil, bumped back plate
Tweeter: 25mm Aluminum dome, Ferro-fluid cooled, Ferrite magnet, wide dispersion
Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-150 watts
Impedance: 8 ohm
SHIPPED WITH GRILLES, FRAMES, BRACKETS AND MANUAL |
|
